[Back to SGI Tech Advice Index]

Ian's...

[About] [Contact] [Feedback] [Services] [Shipping]
[Indy ] [Indigo] [Indigo2] [O2/O2+] [Fuel] [Octane] [Origin] [Chal/Onyx] [VW] [Mon/Cab] [Parts/Spares] [SCSI] [IRIX CDs] [Kybds/Mice] [Misc]

Services

Last Change: 13/Sep/2008

Aswell as buying and selling SGI parts and systems, I can offer my expertise in SGI systems to those who may need it. The services I offer are as follows...

Disk OS Installations

It is often the case that someone who has obtained a 2nd-hand SGI system needs to reinstall the system disk. Some relish the challenge, but for others it may not be possible or practical for them to attempt the reinstallation. In other cases, a disk may have become corrupted. Whatever the case, I can reinstall the system disk for 35 UKP + the return shipping costs of the disk. The disk can either be posted to me, or a disk I already have can be purchased and an installation then carried out. See my feedback page for example comments from people who have asked me to do disk installations for them.

I always put on a full installation, with lots of extras and custom online information (ie. items that are not part of a default installation) so that a user can get to grips with the system straight away - this is especially useful for home/hobbyist users, but can often be very helpful for commercial users who may be unfamiliar with certain aspects of system operation and resources, or it may simply be a useful time-saver. A full IRIX 6.5.x installation typically requires a 4GB disk or larger. An older system such as Indy or non-IMPACT Indigo2 requires at least a 2GB disk. A smaller disk is still perfectly usable though - the user simply decides which items are not to be installed in order to take account of the lower capacity, eg. excluding demo software, freeware, etc.

For more experienced users, I can configure the installation as much as I am able prior to shipping, eg. installed software, system name, IP address, gateway, name servers, etc. I've been an SGI sysadmin since 1995 so I have a a lot of experience in system configuration.

My ethos is to install as much of the OS software as possible; the user can then remove items they may not need, or I can do it for them if they are sure which items can be removed. Either way, I include as much useful extra software as possible. Also included is a good default desktop layout for the root account, plus extra handy scripts and programs in /usr/local/bin, and many other things, especially items that are not installed by default and are not part of the standard SGI Freeware, thus saving users much time and effort, eg. by default I install RealPlayer8, Flash5, IrixDivX, mplayer, OpenOffice, Blender, BMRT, Ayam3D, Eclipse, Doom, Quake, all applicable demo programs (O2, Octane, Certain IMPACT on Indigo2, etc.) and so on. See Appendix A below for a description of what I would normally install on disks of various sizes.

If a disk is to have an older version of IRIX installed, I still do the installation using the same methodology, eg. a full 5.3 with XFS or 6.2 installation with everything installed and ready to use.

System Cleansing

If your system needs cleaning but you'd rather not tackle it yourself, then I can do it for you. It can certainly be a daunting task trying to clean something like an Indigo2, especially if you're not familiar with the internals of the system, or if you don't have the required materials, or the time.

Just send me the system, I'll clean it inside and out, then send it back. The cost is 35 UKP plus the return shipping costs of the system.

Please use good packaging to send me any system as I will always use the sender's packaging to return the system. Of course, a personal delivery and collection would prevent any shipping problems.

Fault Finding

If you have a problem with your system but do not know its nature, then I can attempt to identify the problem for you. Just send me the system and for a flat fee of 25 UKP I will work out what is wrong. This currently only applies to Indigo, Indigo2, Indy, O2, Octane and Origin200 systems.

Assuming I can locate the problem, then I can either replace parts as requested or just return the system as-is (postage paid by sender).

Consultancy

If you are a commercial customer and require assistance, then I can help. I have assisted many commercial users in the past, often visiting them on-site, or they have visited me (bringing their equipment with them).

For a commercial customer, the cost is 200 UKP for a half-day or 400 UKP for a full day, plus expenses such as travel costs, food, etc. If you are a private home/hobbyist user and need help, the cost is 50 UKP for a half day or 100 UKP for a full day.

Note that although my forte is SGI systems, I have a great deal of experience running PC systems too, so I can also help with PC/SGI networking, security, etc.

Appendix A

This is a list of the items I install on a 1GB disk:

Extra SGI items not normally installed by default, eg. PPP/ISDN, XLV, Security Audit Trail, Revision Control System Utilities, Spell Utilities, NFS, Graphics Library Tools, Graphics Library Image Tools, Terminal Information Files, XLV, demo programs, example code, etc.
SGI C/C++ headers, libraries, compilers and development tools required for application development, plus certain GNU tools.
General applications for business tasks and advanced work such as Pegamento, OpenOffice, Premiere, etc.
Imaging applications: SGI's ImageVision Tools (imgview, imgworks, etc.), XV, GIMP, XFig, Eclipse, ImageMagick, xmorph, etc.
Media tools: SGI's IRIS Digital Media Tools, plus xanim, mplayer, mpg123 (an mp3 player), xmms, etc.
Animation/Rendering-related software: Freeze/Melt, PovRay, Blender, Ayam3D and BMRT.
General utitlies: cdrecord, gcombust, plan, nedit, zip and unzip.
Other useful items such as SGI's Software Packager (well worth using if you're creating your own applications for eventual distribution).
Customised online information web pages I've written, listing installed software and links to other online web pages and files for freeware, Blender, BMRT, etc. (much more useful than the normal default web page).

The above is not a complete list since there are too many things to include here.

A 2GB disk allows me to install much more (extra demos, Performer, further development environments, more freeware, etc.) A 4GB disk provides enough space to install almost everything, including Quake and Quake2, plus O2 demos and Octane demos if appropriate (some of the Octane demos run just fine on High and MaxIMPACT). A 9GB disk is ideal.

Here is a typical example output from swmgr, though note this list doesn't include all the manually installed items such as BMRT, MOPS, Blender, RealPlayer8, IrixDivX, Doom, Quake, etc.